Maintenance | 7
0870220060_MH0018A_-0001_IM_en
23 / 40
7.3 Machine Stage Replacement
7.3.1 Stage Disassembly
STEP 1
• If the cylinder has four holes to directly access to the motor screws, unscrew them us-
ing an M5 hexagonal tool and switch to STEP 4. If not, follow the instructions de-
scribed on STEPS 2 and 3.
STEP 2
• If there is any, remove the plumbing (cut the wire) or the blue seal.
STEP 3
• 1. Remove the five M6 screws holding the cylinder and remove the cylinder.
1
2
• 2. Then remove the four M6 screws holding the motor.
Do not unscrew the 3 other screws!
Summary of Contents for MH 0018 A
Page 35: ...T V Certificate 13 0870220060_MH0018A_ 0001_IM_en 35 40 13 T V Certificate...
Page 37: ...Note...
Page 38: ...Note...
Page 39: ...Note...
