7 | Maintenance
18 / 40
0870220060_MH0018A_-0001_IM_en
STEP 4
NOTE
Oil draining.
Recommendation.
• There is no ideal angle to put the gear for oil draining. We would recommend to move
the gearbox several times from standard “vertical position” to a 90° position. The re-
maining oil must be the lowest possible.
1
4
Oil
2
MIN/MAX
3
Oil draining and refilling
Use the new oil filling plug
from the Service Kit
As shown in the illustration above:
• 1. Remove the oil filling plug and drain the oil.
• 2-3. With the machine in vertical position, refill with the new oil until the oil level is
close to the lower edge of the oil draining/filling hole. The amount of oil required to
refill is approximately 90 ml (see
be used to refill).
• 4. Replace the old oil filling plug by the new one from the Service Kit (see
for the service kit part number to be ordered) and tighten it
with a
7 Nm screwing torque
.
Summary of Contents for MH 0018 A
Page 35: ...T V Certificate 13 0870220060_MH0018A_ 0001_IM_en 35 40 13 T V Certificate...
Page 37: ...Note...
Page 38: ...Note...
Page 39: ...Note...
