BUSCH 0659230708, Instruction Manual

Page: 40 / 80

7. 2 .2 Tree diagram of the "Test" menu
TEST
Selection
Choice - Setting
limit
Initial settings
Method Hard Vacuum / Sniffer Hard Vacuum
HV correction Status Deactivated /
Activated
Deactivated
Setting (If Activated) 1·10
+20
- 1·10
-20
1·10
+0
Mode (If hard vacuum test method) Gross Leak /
Normal
Normal
Type of probe (If sniffer test method) Standard Standard
Cycle end Automatic cycle end Operator /
Automatic Operator
Setting
(If Automatic)
Roughing Timer Status Deactivated /
Activated
Activated
Setting 0 - 1 h 10 s
Test Timer 0 - 1 h 10 s
Inlet vent Inlet vent Operator /
Automatic Operator
Delay 0 - 2 s 0 s
Vent Timer Status Deactivated /
Activated
Activated
Setting (If Activated) 0 - 1 h 9 s
Memo function Active No / Yes No
Display Time Status Deactivated /
Activated
Activated
Setting (If Activated) 0 - 1 h 10 s
Zero activation Activation None/ Operator /
Automatic Operator
Value
(If automatic) Trigger Timer / Set point Timer
Value If Timer 0 - 1 h 10 s
If Set Point 1·10
+19
- 1·10
-19
5·10
-7
SPECTRO
Selection
Choice - setting
limit Initial settings
Tracer Gas Helium 4 /
Helium 3 /
Hydrogen Helium 4
Filament selected 1 / 2 1
Filament Off / On On
7. 2 .3 Tree diagram of the "Spectro" menu
Regeneration Function launching - -
Active Massive Mode No/Yes Yes
Sensivity
High / Low High
Zero Exit (if operator) Press once
Press > 3s Press once
40
0870231897_0001_IM_en
Advanced settings