Transport and storage
3 Transport and storage
Upon delivery, check that the product has not been damaged during transport. If the
product is damaged, take the necessary measures with the carrier and notify the manu-
facturer. In all situations we recommend:
Keeping the product in its original packaging so it stays as clean as it was when dis-
patched by us. Only unpack the product once it has arrived at the location where it will
be used.
Keeping the packaging (recyclable materials) in case the product needs to be trans-
ported or stored.
Keeping the blanked-off plate on the inlet port when the product is not in use.
3.1 Transport
Before moving a detector, make sure that the covers are properly attached:
The front cover cancels 3 fixing screws for the rear cover (out of the 5 screws in total):
make sure that these 3 screws are in place and properly tightened.
Make sure that all the fixing screws for the covers on the detector frame (5 screws for
the rear cover and 4 for the front cover) are in place and properly tightened.
To lift the product:
Use a lifting device appropriate for the product's weight.
Use a 3-section strap with the following characteristics:
–length of each section
> 500 mm
–load per section
> 350 kg
3.2 Storage
Storing a new product
If a new detector must be stored:
leave it in its packaging,
WARNING
Risk of injury associated with heavy loads
Given the weight of the product, it should be removed from its packaging only by per-
sonnel qualified and trained in handling heavy materials.
Use the yellow lifting handles installed on the product (re-install if they have been re-
moved).
The manufacturer cannot be held liable for the consequences of using lifting devices
other than those provided.
NOTICE
Work/Handling the detector
The operator must not work on the product to move it or carry out maintenance until it
has come to a complete shutdown! When the circuit breaker is set at
O
, you must:
Unplug the power cable.
Wait for the control panel screen to turn off completely before working on the product
and/or removing the covers.
NOTICE
Obligation to inform
We took care to provide you with a clean product. So that it stays clean, we recommend
storing it in its original packaging.
12
0870231897_0001_IM_en
Summary of Contents for 0659230708
Page 79: ...Note 79 0870231897_0001_IM_en...
