Safety
The potential hazards for a leak detector involve electricity, the tracer gas, the pres-
surised nitrogen supply and the lubricant.
● Only qualified personnel trained in safety rules (EMC, electrical safety, chemical pol-
lution) may carry out the installation and maintenance described in this manual. Our
service centers can provide the necessary training.
● Do not remove the blanked-off flange from the inlet port while the product is not in use.
● Do not expose any part of the human body to the vacuum.
● Comply with all safety and risk prevention instructions in accordance with local safety
standards.
● Regularly check compliance with all precautionary measures.
● Do not turn on the product if the covers are not in place.
2.2 Protective equipment
In some situations, personal protective equipment must be worn when handling the de-
tector and its components. Customers must provide operators with the necessary equip-
ment. This equipment must be checked regularly and used in accordance with the sup-
plier's recommendations.
NOTICE
Filling with oil
Oil must be added to the primary pump before the detector is switched on.
DANGER
Health hazard in case of contact with the operating fluid
Contact with or inhaling products such as oil from the pump can cause irritation.
Wear appropriate protective equipment when carrying out maintenance or adding/
draining oil.
kg
WARNING
Risk of injury due to falling objects
When transporting parts/components and during maintenance there is a danger of loads
slipping and falling down.
Carry small and medium-size parts/components with both hands.
Carry parts/components > 20 kg with a suitable lifting device.
Wear safety shoes with a steel toe in accordance with directive EN 347.
WARNING
Risk of injury through hot surfaces
The products are designed so as not to present a thermal risk for the operator's safety.
However, specific operating conditions may exist that require extra caution from users
due to the high temperatures (surfaces > 70 °C for parts inside the covers).
Leave the part to cool before working on the product.
If necessary wear protective gloves according to directive EN 420.
CAUTION
Risk of pinching
When handling the storage tank cover, there is a risk of fingers becoming pinched.
10
0870231897_0001_IM_en
Summary of Contents for 0659230708
Page 79: ...Note 79 0870231897_0001_IM_en...
