Advanced settings
7.1.7 Viewing a recording
Press on the screen and
[View Rec.]
to view the recording made since the last recor
-
ding was deleted (1)
(see 7.1.1)
.
Fig. 1
2
:
Viewing a recording
Zoom in
If no plots have been made, the message "Memory empty" is displayed.
Zoom in available only for a recording.
Press on the graph and
[View Rec.]
(see 7.1.1)
.
Set the area to be enlarged ((1) then (2)).
Fig. 1
3
:
Selection and viewing the area to be enlarged
Press
[Zoom]
(3): the enlarged area is displayed.
Several successive zooms are possible (except in the same decade).
Zoom out
Zoom out available only for a recording.
Press on 2 occasions on the zoom ((1) then (2)) to return to the original graph.
– The point (2) always has to be situated before the point (1): see example below.
Measurement
Fig. 1
4
:
Return to the original graph
Exact measurement of a point only available on a recording.
Select the point to measure (2).
Press
[Measure]
: the exact measurement of the selected point is displayed.
At any time, the operator can view the recording already made or zoom in on a
recording, without stopping the current recording.
1 Total recording time
1
1
3
2
If necessary, adjust the area to be enlarged by dragging the corners or sides with
your finger.
2
1
37
0870231897_0001_IM_en
Summary of Contents for 0659230708
Page 79: ...Note 79 0870231897_0001_IM_en...
