burster Italia s.r.l. ·
·
·
· Sede legale ed operativa ·
·
·
· Via Cesare Battisti, 16/18 · 24035 Curno (BG) · Tel. +39 035 618120 · Fax +39 035 618250
e-mail: [email protected] · http://www.burster.it
C.F. e P.IVA 11048400151 · Capitale sociale Euro 49.920,00 ···· R.E.A. di Bergamo 276749
Apparecchi di misura di precisione. Sensori e Sistemi
per grandezze elettriche, termiche e meccaniche
1
Read First
1.1
Safety and Caution Symbols
Caution:
Injury Risk for Persons
Damage of the Device is possible
Note:
Important points to be considered
1.2
Intended Use
Torque sensors are intended for the measurement of torques. This measurand is further suitable for control tasks. The valid
safety regulations should be absolutely respected. The torque sensors are not safety components in the sense of the
intended use. The sensors need to be transported and stored appropriately. The assembly, commissioning and
disassembling must take place professionally.
1.3
Dangers
The torque sensor is fail-safe and corresponds to the state of technology.
1.3.1 Neglecting of Safety Notes
At inappropriate use, remaining dangers can emerge (e.g. by untrained personnel). The operation manual must be read and
understood by each person entrusted with the assembly, maintenance, repair, operation and disassembly of the torque
sensor.
1.3.2 Remaining Dangers
The plant designer, the supplier, as well as the operator must plan, realize and take responsibility for safety-related interests
for the sensor. Remaining dangers must be minimized. Remaining dangers of the torque measurement technique must be
pointed out.
Human mistakes must be considered. The construction of the plant must be suitable for the avoidance of dangers. A
danger-analysis for the plant must be carried out.
1.4
Reconstructions and Modifications
Each modification of the sensors without our written approval excludes liability on our part.
1.5
Personnel
The installation, assembly, commissioning, operation and the disassembly must be carried out by qualified personnel only.
The personnel must have the knowledge and make use of the legal regulations and safety instructions.
