© 2019 Burnside Telecom Ltd.
Page 15 of 25
Rev 2.1
SMS example: PNUM0=+44712345
6789”Ace Taxis” The name field may be omitted.
Dialled example: *840*0*00447123456789#.
Note when the IPREFIX IDD digits are matched at the start of a number the IDD
digits are replaced and stored as a
“+” in the PNUMn memory.
An existing number may be cleared, by entering an empty value for example:
PNUM0=,11= (will clear numbers & names from memories 0 and 11).
Value of n:
0-9
Speed dial memory locations 0
– 9.
10
Number for off-hook dia
lling (CFG8=1 “Autodial”).
11
Number for sending SMS automatically (CFG19=1-6).
12
User specifiable number and/or name for SMS report.
REPORT
(=/?)
*842*[phone number]#
Restore settings of the terminal
Shorthand way of combining PNUM11=n and CFG19=1, where n is the phone
number. For example 447123456789
”Bobs mobile”. The name field may
be omitted. The STAT1 will be sent if an error condition occurs.
*842*
Entering REPORT without a number turns off the automatic error reporting and is
equivalent to CFG19=0. For example, REPORT=
RESTOREn
*888*n#
Restore settings of the terminal
n = 0 Restore all settings to factory defaults but retain phone numbers.
n = 1 Also clear phone number memories
STATn
Returns the status of the terminal in one of three different formats specified by n. If n
is omitted it is interpreted as zero.
n = 0 For general status, useful during installation:
Net: my network
Sig: -79dBm
Supply: 12.0V
Bat: 4.12V
PSTN: 48V (only T400LR)
Temperature
– (in degrees Celsius)
Now: 20
Min: 18
Max: 26
Battery: OK/Fault
Ver: 1.0 (firmware version)
IMEI: 357749031743900
n = 1 For information about faults for a technician, each item is sent on a separate line
which is convenient for a smart phone display.
<Imei number> or identity number/name from PNUM 12
Power: Fail/Recovered after d:h:m:s
