Burnham K2WTC, Installation, Operating And Service Instructions

Page: 107 / 160

107 107774-01- 9/17
XIII. Operation
E. Boiler Sequence Of Operation (continued)
3. Status Screens
Boiler Status screens are the primary boiler monitoring screens. The user may simply “walk” though boiler operation
by repeatedly selecting the right or left “arrow” symbol. These screens are accessed by selected the “Status” button
from the “Home” screen.
Figure 13.6: Status Screens
Figure 13.7: Boiler Status Screen Definitions
Boiler 1
>
50%
Setpoint
Supply 180
F
Priority: Central Heat
Status: Running
180
F
Rate
<
Zone Control Status
press for zone cycles
> <
Panel 1
1 , 2 , 3 , 4
Panel 2
1 , 2 , 3 , 4
i
>
<
Status
50%
Rate
Stack 180
F
180
F
Return
Supply 180
F
i
Heat Demand
Central Heat ON
Auxiliary Heat Off
Domestic Hot Water Off
Frost Protection Off
>
<
<
>
System Circ. ON 98
Boiler Circ. ON 23
DHW Valve CH 0
Circulator Status/ Cycles
i
<
>
Flame Signal 9.43 uA
Boiler Cycles 10
Run Time Hours 2
Burner Status
i
NOTE
Only visible if Sage Zone Panel
is connected. Zone Panel 1 and 2
shown typical for 1 through 4.
Priority:
The selected Priority is shown. Available Priorities
are: Standby (no call for heat is present), Sequencer
Control, Central Heat, Auxiliary Heat, Domestic
Hot Water, Frost Protection, or Warm Weather
Shutdown.