manualshive.com logo in svg

burmeier Regia, Instruction Manual

Share
Download
burmeier Regia Instruction Manual Download Page 66

3.6.3.2

Combination of split safety side and side panels

WARNING

Risk of injury

Failure to heed these warnings may result in injury due to the unauthorised combined instal-
lation of the split safety side (90 cm wide) and side panel (110 cm wide)!

•

Figure A: Short safety side, 90 cm, at the head end, and 110 cm side panel at the foot
end: This combination is only permitted as a mobilisation aid to facilitate the entry and exit
of residents who do not require increased protection in the form of safety sides to prevent
them from accidentally falling out of bed.

•

Figures B, C and D: More extensive, standard-compliant protection against accidentally
falling out of bed can only be achieved with these variants.

[1]

Split safety side, 90 cm wide

[2]

Side panel, 110 cm wide

[3]

Split safety side 110 cm wide

[4]

Side panel, 90 cm wide

Fig. A

Fig. B

Fig. C

Assembling the Care Bed

30

Part B: Operator and Technical Personnel

Summary of Contents for Regia

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands