3.6.3.1
Installation
•
After assembly, carry out the mandatory checks to make sure that the fixings are secure.
•
To ensure that the plastic locking levers of the “Easy Switch” system function properly, do
not allow them to fall or suffer severe knocks during disassembly or storage.
•
Never use “Easy Switch” systems that are damaged.
The split safety side (TSG) (Easy Switch) consists of four sections. These simply clamp onto
the long sides of the bed to attach them. The safety sides are available in two sizes: 2x long
(110 cm) and 2x short (90 cm). One long and one short safety side is fitted to each side of
the bed. Start with the long safety side, at the head end on the left-hand side:
1
First swivel the locking levers (left and
right) of the safety sides [2] downwards. To
do so, pull the orange safety lock [1] out-
wards with your finger and hold it in this
position while tilting the locking lever
downwards.
2
Attach the safety side to the long bed
frame tube at the head end, as shown.
Assembling the Care Bed
28
Part B: Operator and Technical Personnel
Summary of Contents for Regia
