background image

II.  Important Safety & Operating 

Information

Caution to New Recumbent Riders: The riding position and weight distribution 
on recumbents is quite different than on average “up right” bicycles and contributes 
to unique han dling char ac ter is tics. Starting up from a standstill, turn ing at low 
and high speeds, and cornering and braking in wet weather will all be somewhat 
different from other  bicycles. It is rec om mend ed that you become thor ough ly 
acquainted with the han dling and per for mance of your recumbent before riding 
among  au to mo bile  traffi c or other cyclists.

BECOME FAMILIAR WITH HANDLING CHARACTERISTICS: Your Bur ley 

recumbent bi cy cle will handle dif fer ent ly from other bicycles. Do not 

ride this bicycle among automobile traffi c or other cyclists before 

you are thor ough ly familiar with its handling char ac ter is tics. Failure 

to do  so could result in accident and serious injury or death.

The addition of accessories, such as racks, trailers and trailercycles can affect the 
handling of your recumbent. Add these accessories only after you are thoroughly 
acquainted with your recumbent. Practice riding with these accessories in an open 
area free of automobile traffi c. 

PRACTICE USING ACCESSORIES: The handling characteristics of your 

recumbent  will change with the addition of loaded racks, a trailer or 

a trailercycle. Only add these accessories after you are completely 

familiar with the handling of your recumbent. Failure to do so could 

result in an accident and serious injury or death.

Seat frame

Rear shock

Suspension 

pivot

Seat 

base

Tilt and height-adjustable 

steering mast

3

Summary of Contents for RECUMBENT





















Reviews: