37
Installation in a pipe
Type 8098 FLOWave L
6. Put the magnetic key on the
mark related
to the blind cover. You should hear a click indi-
cating that the blind cover is unlocked. Do not
use a tool to turn the blind cover.
7. Turn the blind cover by hand only to the unlocked
position and remove it. If you cannot turn the
blind cover by hand, contact Bürkert.
8. Put the cable of the display module or the Wi-Fi
module through the front opening.
9. Connect the cable to the connector, as shown in
the figure.
10.
Put the mark of the display module or the Wi-Fi
module on the unlocked marking of the trans-
mitter housing and screw the cover clockwise
on the transmitter until the mark is on the locked
position.
Connect the cable here
11. Put the mark of the blind cover on the unlocked
marking of the top of the transmitter housing.
12. Screw the blind cover clockwise on the trans-
mitter until the mark is on the locked position.
You should hear a click.
The blind cover is locked.
English
