25
Set the amount of time after the hot
water has completely pumped into
the brew chamber, for the pre-heat
cycle so that the drain valve is on to
drain the chamber.
Sets the dispense time (in seconds)
for a small COFFEE WHITE beverage.
Menu repeats for nine other
beverages.
SET DRAIN TIME
(-)
.# sec
(+)
SM COFFEE WHITE
(-) #.# sec (+)
SM BREW VOLUME
(-)
###
(+)
DISPENSE LOCKOUT?
NO
EXIT
YES
TEST SWITCHES
UseSwitchToTest
Sets the brew volume for a small
espresso by flow count from flow
meter. Menu repeats for large
espresso.
Enables locking out beverage
dispensing if either tank is not at or
above the ready temperature.
Pressing any switch on the door will
display the switch number on the LCD
to confirm function. This is a momen-
tary switch function.
TEST REFILL
EXIT YES
Pressing any switch on the door will
activate the soluble tank refill valve.
This is a momentary switch function.
Pressing any switch on the door will
activate the left hopper auger motor.
This is a momentary switch function.
TEST RIGHT AUGER
DISPENSE TO TEST
TEST LEFT WHIPR
DISPENSE TO TEST
TEST HOT WATER
DISPENSE TO TEST
TEST LFT PWDR VLV
DISPENSE TO TEST
Pressing any switch on the door will
activate the hot water valve. This is a
momentary switch function.
Pressing any switch on the door will
activate the left powder hot water
valve. This is a momentary switch
function.
TEST LEFT AUGER
DISPENSE TO TEST
GLOSSARY - continued
SM ESP GRIND TIME
(-)
#.# sec
(+)
Sets grinder run time for small
espresso. Repeat of menu in
STRENGTH ADJUST sub menu.
Menu repeats for large espresso.
SM DRY TAMP %
(-)
###
(+)
Sets the percentage of full voltage
to piston motor for tamping the
dry puck. Menu repeats for large
espresso.
Sets the espresso pump run time for
pre-infusion of tamped coffee. Zero
seconds for no pre-infusion. Menu
repeats for large espresso.
SM PREINFUSION
(-) #.# sec
(+)
Sets the dwell time (in seconds)
between pre-infusion and the start of
the espresso pump for final brewing.
Menu repeats for large espresso.
SM DWELL TIME
(-) #.# sec
(+)
RINSE ALARM?
NO
EXIT
YES
Asks if you want to set an alarm, if a
rinse cycle has not been run for “X”
amount of time since the last rinse
cycle.
RINSE ALARM TIME
(-) 12 Hours (+)
Sets the number of hours since
the last rinse cycle was run before
signaling a rinse is needed.
RINSE LOCKOUT?
NO
EXIT
YES
Enabling prevents the dispensing of
any beverage until a rinse cycle is
completed.
LOW HPR LOCKOUT?
NO
EXIT
YES
Enabling prevents espesso brewing
if a low bean hopper condition is
detected.
TEST MDL AUGER
DISPENSE TO TEST
Sets the dispense time (in seconds)
for a large COFFEE WHITE beverage.
Menu repeats for nine other
beverages.
LG COFFEE WHITE
(-) #.# sec (+)
Pressing any switch on the door will
activate the middle hopper auger
motor. This is a momentary switch
function.
Pressing any switch on the door will
activate the right hopper auger motor.
This is a momentary switch function.
Pressing any switch on the door will
activate the left whipper motor. This is
a momentary switch function.
TEST RT WHIPR
DISPENSE TO TEST
Pressing any switch on the door will
activate the right whipper motor. This
is a momentary switch function.
TEST RT PWDR VLV
DISPENSE TO TEST
Pressing any switch on the door will
activate the right powder hot water
valve. This is a momentary switch
function.
TEST DRAIN VALVE
DISPENSE TO TEST
Pressing any switch on the door will
activate the drain valve in the brew
group. This is a momentary switch
function.
TEST PUMP N VALV
DISPENSE TO TEST
Pressing any switch on the door
will activate the solenoid pump and
espresso valve. This is a momentary
switch function.
TEST ESPRESSO VALV
DISPENSE TO TEST
Pressing any switch on the door will
activate the espresso valve. This is a
momentary switch function.
TEST SOLUBLE FAN
DISPENSE TO TEST
Pressing any switch on the door will
activate the soluble fan. This is a
momentary switch function.
PUCK BIN
NOT PRESENT
Signals puck bin status.
52384.0 101116
