Bulls BROSE FIT Operating Instructions Manual Download Page 234

Page: 234 / 290

MY22XXX - XX_1.0_14.06.2022

233

Troubleshooting, fault clearance and repair

9.2.13.3 Suspension too soft on inclines

The fork deflects at a low point in the terrain. The
deflection is quickly used up, body weight shifts
forward and the pedelec loses some momentum.

Figure 201: Excessively soft suspension in the suspension fork on hilly terrain

Solution

Figure 202: Changing compression adjuster to a harder
setting



Turn

compression adjuster

in a clockwise

direction towards LOCK.



The damping and compression hardness are
increased and the deflection stroke speed.
Efficiency on hilly and flat terrain is improved.

Summary of Contents for BROSE FIT



































































































































































































































































































Search results

Summary of Contents for BROSE FIT

Reviews:

Related manuals for BROSE FIT

Brands by name

Popular brands

Bulls BROSE FIT, Operating Instructions Manual

Search results

Summary of Contents for BROSE FIT

Reviews:

Related manuals for BROSE FIT

Brands by name

Popular brands