Bulls BROSE FIT Operating Instructions Manual Download Page 159

Page: 159 / 290

MY22XXX - XX_1.0_14.06.2022

158

Operation

6.20.1 Adjusting the SR SUNTOUR compression adjuster

Figure 151: SR SUNTOUR compression adjuster in open (1) and closed (2) position



Place

compression adjuster

in the OPEN

position.



The compression adjuster is open.



Place

compression adjuster

in the LOCK

position.



The compression adjuster is locked.



Position

compression adjuster

between

OPEN and LOCK.



This position allows you to fine-tune the
compression adjuster.

We recommend setting the

compression adjuster

to the OPEN position first.

Summary of Contents for BROSE FIT



































































































































































































































































































Search results

Summary of Contents for BROSE FIT

Reviews:

Related manuals for BROSE FIT

Brands by name

Popular brands

Bulls BROSE FIT, Operating Instructions Manual

Search results

Summary of Contents for BROSE FIT

Reviews:

Related manuals for BROSE FIT

Brands by name

Popular brands