Bullard RT Series User Manual Download

Page: 11 / 12

www.bullard.com

dering Inf

ormation

RT Series Respirator Hood

User Manual for use with supplied air respirators

Parts and Accessories

CATALOG
NUMBER DESCRIPTION

CATALOG
NUMBER

DESCRIPTION

Air Supply Hoses and Fittings for CC20 Series

Airline Respirators

V10 Series Starter Hose Kits

For use with Breathing Air Compressors

Include 25’ (7.6m), 3/8” I.D. rubber hose with 1/4” female quick-disconnect coupler

and V13 adapter fitting (3/8” hose-to-3/8” pipe)

4696

With 1/4” Industrial Interchange steel (Hansen

compatible) quick-disconnect coupler

46913

With 1/4” Schrader steel quick-disconnect coupler

46915

With 1/4” Snap-Tite steel quick-disconnect coupler

V10 Series Extension Hose Kits

For use with Breathing Air Compressors

Include 3/8” I.D. rubber hose, V11 hose-to-hose adapter fitting and V13 hose-to-pipe

fitting (3/8” hose-to-3/8” pipe)

5454

25’ (7.6 m) Extension hose kit

5457

50’ (15.2 m) Extension hose kit

5458

100’ (30.5 m) Extension hose kit

V5 Series Coiled Hoses

For use with Breathing Air Compressors

Include 3/8” I.D. Nylon coiled hose with 1/4” female quick-disconnect coupler and

1/4” male quick-disconnect nipple.

V52530

25’ (7.6 m) with 1/4” Industrial Interchange steel (Hansen

compatible) fittings

V55030

50’ (15.2 m) with 1/4” Industrial Interchange steel (Hansen

compatible) fittings

V52531

25’ (7.6 m) with 1/4” Schrader steel quick-disconnect fittings

V55031

50’ (15.2 m) with 1/4” Schrader steel quick-disconnect fittings

V52532

25’ (7.6m) with 1/4” Snap-Tite steel fittings

V5 Series Kink-Free Hoses *

XXX is designation RED, GRN, BLK, YLW, BLU

For use with Breathing Air Compressors

Include 3/8” I.D. Nylon coiled hose with 1/4” female quick-disconnect coupler and

1/4” male quick-disconnect nipple.

V5KF2530XXX

25’ (7.6 m) with 1/4” Industrial Interchange

steel (Hansen compatible) fittings

V5KF5030XXX

50’ (15.2 m) with 1/4” Industrial Interchange steel

(Hansen compatible) fittings

V5KF2531XXX

25’ (7.6 m) with 1/4” Schrader steel quick-

disconnect fittings

V5KF5031XXX

50’ (15.2 m) with 1/4” Schrader steel quick-

disconnect fittings

V5KF2532XXX

25’ (7.6m) with 1/4” Snap-Tite steel fittings

V5KF5032XXX

50’ (15.2 m) with 1/4” Snap-Tite steel fittings

V5KF2533XXX

25’ (7.6m) with 1/4” Snap-Tite brass fittings

V5KF5033XXX

50’ (15.2 m) with 1/4” Snap-Tite brass fittings

V5KF2533XXXFF 25’ (7.6m) with 1/4” Snap-Tite brass fittings

V5KF5033XXXFF 50’ (15.2 m) with 1/4” Snap-Tite brass fittings

V5KF2533XXXFS 25’ (7.6m) with 1/4” Snap-Tite brass fittings

V5KF5033XXXFS 50’ (15.2 m) with 1/4” Snap-Tite brass fittings

V5KF2535XXX

25’ (7.6 m) with 1/2” Industrial Interchange

steel (Hansen compatible) fittings

V5KF5035XXX

50’ (15.2 m) with 1/2” Industrial Interchange

steel (Hansen compatible) fittings

V20 Series Hoses

For use with Bullard Free-Air Pumps

Include 1/2” I.D. rubber hose with 1/2” Industrial Interchange (Hansen compatible)

female quick-disconnect coupler and

1/2” male quick-disconnect nipple

V2050ST

50’ (15.2 m)

V20100ST

100’ (30.5 m)

Quick-Disconnect Nipples, Couplers and Adapters

For use with V10 hoses only

Nipples

1/4” Industrial Interchange (Hansen compatible)

S9841

With 1/4” Female NPT

V17

With 3/8” Female NPT

1/4” Schrader

S19432

With 1/4” Female NPT

S19433

With 3/8” Female NPT

1/4” Snap-Tite

S19442

With 1/4” Female NPT

S17651

With 3/8” Female NPT

Couplers (Shut-Off Type)

1/4” Industrial Interchange (Hansen compatible)

V14

With 1/4” Female NPT

V15

With 3/8” Male NPT

1/4” Schrader

V18

With 1/4” Female NPT

S17603

With 1/4” Male NPT

S17601

With 3/8” Male NPT

1/4” Snap-Tite

V19

With 1/4” Female NPT

S17615

With 3/8” Female NPT

S17611

With 1/4” Male NPT

S17614

With 3/8” Male NPT

Hose Adapters

V11

Hose-to-hose, 3/8” hose to 3/8” hose

V12

Hose-to-pipe, 3/8” hose to 1/4” pipe

V13

Hose-to-pipe, 3/8” hose to 3/8” pipe

Other Available Flow Control Assemblies (without breathing

tube) for RT Series Airline Respirators

Adjustable Flow

F40

1/4” Industrial Interchange

F40B

1/4” Industrial Interchange (Brass)

F40S

1/4” Industrial Interchange (Stainless Steel)

F41

1/4” Schrader

F42

1/4” Snap-Tite, steel

F43

1/4” Snap-Tite, brass

F44

1/4” Snap-Tite, stainless steel

Constant Flow

F30

1/4” Industrial Interchange

F30B

1/4” Industrial Interchange (Brass)

F30S

1/4” Industrial Interchange (Stainless Steel)

F31

1/4” Schrader

F32

1/4” Snap-Tite, steel

F33

1/4” Snap-Tite, brass

F34

1/4” Snap-Tite, stainless steel

F35

1/2” Industrial Interchange

F35B

1/2” Industrial Interchange (Brass)

F35S

1/2” Industrial Interchange (Stainless Steel)

Summary of Contents for RT Series













Search results

Summary of Contents for RT Series

Reviews:

Related manuals for RT Series

Brands by name

Popular brands

Bullard RT Series, User Manual

Search results

Summary of Contents for RT Series

Reviews:

Related manuals for RT Series

Brands by name

Popular brands