Bullard RT Series User Manual Download

Page: 10 / 12

www.bullard.com

dering Inf

ormation

Parts and Accessories

RT Series airline respirators consist of four components – respirator hood, breathing tube, flow control device, and air supply hose. All components must be
present and properly assembled to constitute a complete NIOSH approved respirator.

CATALOG
NUMBER

DESCRIPTION

CATALOG
NUMBER

DESCRIPTION

Fully Disposable Respirator Assemblies

RT1DA

Includes RT1 hood with RTBT breathing tube installed

and ready for use

RT2DA

Includes RT2 hood with RTBT breathing tube installed

and ready for use

RT3DA

Includes RT3 hood with RTBT breathing tube installed

and ready for use

RT4DA

Includes RT4 hood with RTBT breathing tube installed

and ready for use

Respirator Assemblies

For use with compressed air

RT130

Includes RT1 hood, and V30 breathing tube

assembly
RT230

Includes RT2 hood, and V30 breathing tube

assembly
RT330

Includes RT3 hood and V30 breathing tube assembly

RT430

Includes RT4 hood and V30 breathing assembly

Respirator Hoods

RT1

Tychem QC hood, inner bibs, inflatable neck cuff

RT2

Tychem SL hood, inner bibs, inflatable neck cuff

RT3

Tychem QC hood, inner bib, sport neck cuff

RT4

Tychem SL hood, inner bib, sport neck cuff

Accessories

36501

Belt, decontaminable

Heat Shield

Flow Control Devices for RT Series Airline

Respirators

Flow Control Valves

F30

Constant flow control valve with 1/4” Industrial
Interchange (Hansen compatible) quick-disconnect
nipple (other industrial fittings available)

F40

Adjustable flow control valve with 1/4” Industrial

Interchange (Hansen compatible) quick-disconnect

nipple (other industrial fittings available)

F35

Constant flow control valve with 1/2” Industrial
Interchange (Hansen compatible) quick-disconnect

nipple

Climate Control Assemblies for

RT Series Airline Respirators

For use with Breathing Air Compressors

Cold Tubes – Adjustable Flow

AC100030

With 1/4” Industrial Interchange steel (Hansen

compatible) quick-disconnect nipple

AC100031

With 1/4” Schrader steel quick-disconnect nipple

AC100032

With 1/4” Snap-Tite steel quick-disconnect nipple

AC100033

With 1/4” Snap-Tite brass quick-disconnect nipple

AC100034

With 1/4” Snap-Tite stainless quick-disconnect nipple

Hot/Cold Tubes - Adjustable Flow

HC2400

With 1/4” Industrial Interchange steel (Hansen

compatible) quick-disconnect nipple

HC240031

With 1/4” Schrader steel quick-disconnect nipple

HC240032

With 1/4” Snap-Tite steel quick-disconnect nipple

HC240033

With 1/4” Snap-Tite brass quick-disconnect nipple

HC240034

With 1/4” Snap-Tite stainless quick-disconnect nipple

Replacement Parts for Climate Control Assemblies

MV2400

Muffler/valve assembly for HC2400

Dual-CooL™ - Climate Control Device

DC5040

With 1/4” Industrial Interchange steel (Hansen
compatible) quick-disconnect nipple. Includes CH60
connector hose and nylon belt (Order vest

separately)

DC5041

Same as above with 1/4" Schrader steel nipple

DC5042

Same as above with 1/4" Snap-Tite steel nipple

DC5043

Same as above with 1/4" Snap-Tite brass nipple

DC5044

Same as above with 1/4" Snap-Tite stainless nipple

DC70M/L

Medium/Large cooling vest

DC70XL/XXL

Extra Large/XX-Large cooling vest

Climate Control Assembly

For use with Bullard EDP30

or ADP20 Free-Air Pump

Cool Tube - Adjustable Flow

Frigitron® 2000

With 1/2” Industrial Interchange steel (Hansen

compatible) quick-disconnect nipple.

AC1000 Series

HC2400 Series

RT Series

Hood

DC70M/L

DC70XL/XXL

DC5040

Dual-Cool

Frigitron 2000

Summary of Contents for RT Series













Search results

Summary of Contents for RT Series

Reviews:

Related manuals for RT Series

Brands by name

Popular brands

Bullard RT Series, User Manual

Search results

Summary of Contents for RT Series

Reviews:

Related manuals for RT Series

Brands by name

Popular brands