Bull NovaScale T840, User Manual

Page: 84 / 302

User Guide
84
www.bull.com
Power Supply
Depending on your configuration, your system features one of the power supplies
described below:
■
A hot-swappable power supply fitted with one or two power supply modules
(implying redundancy features).
■
A fixed power supply.
Connecting the Power Cord(s)
Plug the female end of the AC power cord(s) shipped with your system into the input
receptacle(s) on the rear of your system power supply.
Plug the male end of the power cord(s) into NEMA 5-15R outlet(s) for 100-120 VAC
or NEMA 6-15R outlet(s) for 200-240 VAC.
If a power cord supplied with the system is not compatible with the AC wall outlet in
your region, obtain a suitable power cord that meets the following criteria:
■
The power cord must be rated for the available AC voltage and have a current
rating that is at least 125% of the current rating of the system.
■
The power cord connector that plugs into the wall outlet must be terminated in a
grounding-type male plug designed for use in your region. It must have
certification marks showing certification by an agency acceptable in your region.
■
The power cord connector that plugs into the system must be an IEC- type CEE-22
female connector.
■
The power cord must be less than 1.8 meters (6.0 feet) long.
When connecting the power cord(s) to a power control unit such as a UPS unit, confirm
that the power control unit is powered OFF. Connecting the power cord(s) while power
is supplied to the power control unit may cause a failure.
Warning
Do not attempt to modify or use the supplied AC power cord if it
is not the exact type required.