User Guide
109
www.bull.com
7.
When prompted with the message [Are you sure?], select [Yes] and press
Enter
.
Selecting [No] cancels the array creation and returns to the
Main
menu.
8.
When the message [Build Completed] is displayed, press
Esc
to return to the
Main
menu.
Note: On the Main menu, make sure that "Optimal" is
indicated for the status of the created array.
Creating RAID1 Array
To create a RAID1 array, perform either of the followings:
■
Create a new RAID1 array.
■
Migrate to RAID1 array using the data stored in an existing single disk.
(Migration)
Creating RAID1 array using an existing single hard disk drive is called "migration".
During the migration, the source hard disk drive must have been used as the boot disk
in the standard SCSI connection.
Refer to the "HostRAID Setup Card" documentation for details on the migration.
To create a RAID1 array:
1.
Select [RAID-1] on the [Select RAID Type] window.
2.
Use the cursor key to highlight the desired hard disk drives, press
Space
to
select them (an [X] mark is placed next to the selected hard disk drive) and
when the selection is finished, press
Enter
to validate it.
Select one of the options in the [RAID-1 Build Option] window and press
Enter
.
Summary of Contents for NovaScale T840
