Bull NovaScale R440 E1, User Manual, Page: 131 / 366

User Guide
130
www.bull.com
As an example, define a RAID5 VD of yyyyy MB.
1. Specify the necessary parameters in left columns.
2. Enter "yyyyy" in "Select Size" field.
3. Click [Accept] at the lower center of the screen.
4. If you want to define another VD, click [Back] and repeat the steps starting
from the Span Definition screen.
5. When the VD is defined, click [Next].
Caution
■
The value shown in "Select Size" indicates the maximum
size allowed for RAID1 or RAID6. You need to specify the
maximum size for RAID0 or RAID5 according to "Next LD,
Possible RAID Levels".
■
To use RAID 5 or RAID 6 with Internal RAID Controller, you
need to install the optional RAID Upgrade Kit.
■
If the RAID Upgrade Kit is not installed, do not select
"RAID5" that may appear in [RAID Level] box. If selected,
you will fail to save the configuration information. In such a
case, you need to define a VD again from the beginning.