Bull NovaScale R440 E1, User Manual, Page: 103 / 366

User Guide
102
www.bull.com
Others
Clear Configuration
Clears the Configuration information. Select "Configure"
→
"Clear Configuration"
from the TOP menu. Executing "Clear Configuration" clears all Configuration
information on the RAID Controller and hard disk drives. The Configuration
information on all channels of the RAID Controller is also cleared.
Notes:
■
When the Configuration information on the RAID Controller
and that on the hard disk drive do not match (excluding at
the replacement of a aulty RAID Controller), Configuration
may fail if you select the Configuration information on the
RAID Controller. In this case, execute "Clear Configuration"
to create Configuration again.
■
LSI Software Raid Configuration Utility cannot delete each
virtual drive. Use the Universal RAID Utility instead.
Force Online
Puts online a hard disk drive being in the FAIL status.
Select "Objects"
→
"Physical Drive"
→
(select hard disk drive)
→
"Force Online"
from the TOP menu.
Rebuild Rate
Sets the Rebuild Rate.
Select "Objects"
→
"Adapter"
→
"Sel. Adapter"
→
"Rebuild Rate" from the TOP
menu.
Available value is between 0% and 100%. Default value (recommended) is 30%.
Hard disk drive information
Checks hard disk drive information.
Select "Objects"
→
"Physical Drive"
→
(select hard disk drive)
→
"Drive Properties"
from the TOP menu.