Bull NovaScale Blade 2040 Series, Installation And User Manual, Page: 62 / 104

44
NovaScale Blade 2040 Installation and User’s Guide
Closing the blade server cover
Important: The blade server cannot be inserted into the system chassis until the cover is installed
and closed, or a SCSI storage expansion unit is installed. Do not attempt to override this protection.
The following illustration shows how to close the blade server cover.
Complete the following steps to close the blade server cover:
1. Review the information in “General Safety” and “Electrical Safety” beginning on page iii and
“Installation guidelines” on page 19.
2.
If you removed the blade bezel assembly, replace it now. See “Installing the blade server bezel
assembly” on page 42 for instructions.
3. Lower the cover so that the slots at the rear slide down onto the pins (A) at the rear of the blade
server, as shown in the illustration. Before closing the cover, check that all components are
installed and seated correctly and that you have not left loose tools or parts inside the blade
server.
4.
Pivot the cover to the closed position as shown in the illustration, until it clicks into place.
TP00451
A