background image

 

30

 

 

 

Warranty

 

Policy

 

(Continued)

 

Grill

 

Warranty

 

Periods

 

The following parts are covered for 

one

 

year

 on all our current gas grill models: 

he lid, control panel, grease tray, bezels, knobs, temperature gauge, valves, regulator, flex tubes, 
rotisserie burner, transformer, and all components of the lighting system. 

The following parts are covered for 

three

 

years

 on all our current gas grill models: 

The manifold, handle end caps, flame tamers, heat shields, and warming rack. 

The following parts are covered for 

lifetime

 on all our current gas grill models: 

Insert assembly and the grates. 

The warranty period for the grill burners vary by type: 

Cast stainless steel burners - 

lifetime

,  

Welded burners – 

5

 

years

, and  

Porcelain coated burners – 

3

 

years

The warranty period for the charcoal grill is 

one

 

year

 on all parts, except for the insert assembly, 

which is covered for 

5

 

years

.  

The Bel Air grill included a 

one

year

 warranty on all parts. 

Component

 

Warranty

 

Periods

 

All of the parts for our components/grill carts/refrigerators/kegerators/drawers/doors are covered 
for 

one

 

year

 with these exceptions: Power Burner 

 

The insert/grates are 

lifetime

 covered parts.   

 

The manifold/burner are covered for 

3

 

years

 
Searing Station/Slide in Double Sideburner 

 

The grates are covered for 

lifetime

,  

 

the insert for 

5

 

years

, and  

 

the manifold for 

3

 

years

 
Single Sideburner 

 

The grates are covered for 

5

 

years

 and  

 

the burner for 

3

 

years

Sidekick 
The burner is covered for 

3

 

years

Pizza

 

Ovens/Islands/Fire

 

Features

 

Warranty

 

Periods

 

All of the parts and construction materials are covered for 

one

 

year

Grill Accessories and Grill Covers do not include a warranty period. 

Summary of Contents for BRAHMA 57568
































Reviews: