11
THE LOCATION AND INSTALLATION OF YOUR GRILL
Your Built-in Gas Grill comes to you fully assembled. We strongly recommend professional installation and hook up of the Gas
BBQ grill. These instructions will provide you with the measurements necessary for you or your builder to construct a masonry
structure for your outdoor gas grill.
1)
This gas grill must be installed in accordance with local codes or, if in an area without local codes, with the latest edition of
the National Fuel Gas Code ANSI Z223.1. In Canada, installation must conform to the standard CAN/ CGA 1-b149.1 and/or
(Installation Code for Gas Burning Appliances and Equipment) and any local codes
2)
The outdoor cooking gas appliance, when installed, must be electrically grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, Part I, CSA C22.1.
a)
To protect against electric shock, do not immerse cord or plugs in water or other liquid.
b)
Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off part.
c)
Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance malfunctions or has
been damaged in any manner. Contact the manufacturer for repair
d
) Do not let the cord hang over the edge of a table or touch hot surfaces.
e)
Do not use an outdoor cooking gas appliance for purposes other than intended.
f)
When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.
g)
Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance
h)
Never remove the grounding plug or use with an adapter of 2 prongs and
i)
Use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved for outdoor
use with a W-A marking.
3) DO NOT
use your gas grill in garages, porches, breezeways, sheds or other enclosed areas.
4)
Your gas grill is to be used OUTDOORS ONLY, with at least 21 inches clearance from the back and side of any combustible
surface.
5)
The grill should not be placed under or on top of any surface that will burn.
6) Do not
obstruct the flow of combustion and ventilation air around the grill housing.
NOTES TO INSTALLER:
1)
Leave these instructions with the consumer for future reference
.
2)
The grill must be installed in accordance with all local building codes.
3)
Do not use any combustible materials for this construction.
4)
Minimum horizontal clearance to adjacent combustible surface from side and back of the grill must be
21 inches.
5)
Provide 6 inches of clearance behind grill to allow front portion of hood to open and for ventilation purposes.
6)
Please remove the cotter pins from the burners before installing unit into an island. See page 12 for cotter pin removal.
GRILL VENTILATION INSTRUCTIONS
PLEASE
READ
THESE
INSTRUCTIONS
BEFORE
INSTALLING
YOUR
GAS
GRILL
Summary of Contents for BRAHMA 57568
Page 7: ...7 ...
