Bulex Thema Condens AS 48-A, Manual, Page: 72 / 199

MAKSİCONDENSE 48-65
Notes
01/2018 66 Training 0020260859_00
3.3.4.5 Integrated outdoor temperature control system
The unit is equipped with an outdoor temperature control system via a connected outdoor sensor.
To use the function, two parameters are used for setting:
-
D.043 for setting the heat curve
- D.048 for setting the heat curve's base point
To determine the heat curve, the regional surface contact temperature for the system temperature
must be determined.
The base point setting is set to
20
°C
room temperature at the factory. This parameter can be cor-
rected between 15
–25 °C
if the real room temperature deviates from the set value.
Example:
Heat demand (room) = 20
°C, real room temperature = 19 °C => correction to 21 °C
Internal heat curve with influence on the room temperature if a weather-compensated control, e.g.
MiPro, is used
Flow
temperature
[°C]
Outdoor temperature [°C]
g
MiPro temperature setting