Bulex Thema Condens AS 48-A, Manual, Page: 169 / 199

MAKSİCONDENSE 48-65
Notes
03/2020 163 T
EKNİK EĞİTİM VE DESTEK
Display Meaning/text Display values/adjustable values
XXXX Parameter with code 96 entered XXX
D.028
Accessory relay 2
(2 in 7 multi-functional module/VR 40)
Circulation pump [1]/ External pump [2] /Cyl-
inder charging pump [3]/Extraction hood
[4]/Ext. solenoid valve [5]/
Ext. fault message [6]
Not active: Solar pump [7]/eBUS remote
control [8]/Legionella protection pump [9]
D.029 Current volume flow l/min
D.033 Fan speed target value In rpm
D.034 Fan speed actual value In rpm
D.035 3-port valve position
Heating mode [0%]/Parallel operation
[50%]/Domestic hot water mode [100%]
D.040 Actual flow temperature value
in °C
D.041 Return temperature actual value
in °C
D.044 Digitised ionisation value
0 to 1020
Good flame < 400
No flame > 800
D.047
Outdoor temperature (with weather-com-
pensated boiler control)
Actual value in °C
D.050 Offset min. speed
0 to 3000 rpm
Unit-dependent factory setting
D.051 Offset max. speed
- 990 to 0 rpm
Unit-dependent factory setting
D.060
Number of safety cut-out switch-off se-
quences
Value
D.061
Number of flame sequence control switch-
off sequences
Value
D.064 Avg. ignition time In sec.
D.065 Max. ignition time In sec.
D.067 Remaining anti-cycl. time for heating In minutes
D.068 Number of first start attempts Quantity
D.069 Number of second start attempts Quantity
D.071 Max. Heating target flow temp.
In °C, adjustment range, 40 – 80 °C ( 75 °C
)
D.072
Pump overrun after cylinder charging
(warm start for SPACE HEATERW)
In min, adjustment range, 0
– 10 min
(2 min)
D.074 Anti-legionella function (shift-load cylinder) ON
D.075
Max. cylinder charging time (domestic hot
water cylinder without own control system) In min, adjustment range, 20
– 90 min
(48 min)