Bulex Thema Condens AS 48-A, Manual, Page: 152 / 199

MAKSİCONDENSE 48-65
Notes
01/2018 146 Training 0020260859_00
(1)
(1)
6.3.5.4 Checking the CO
2
content
Check programmes "P.01" and "P.02" are available for this.
Check the unit functions (heating mode, domestic hot water mode)
It is best to do this using the Live Monitor, since this allows you to read all of the main operating
modes.
1. Guarantee the heat consumption.
2. Start the unit with check programme P.01 .
3. Keep the unit in operation for five minutes, un-
til it reaches its operating temperature.
4. Use a flue gas measuring instrument to meas-
ure the CO
2
content on test opening (1) on the
boiler connection piece.
5. Compare the CO2 content with the required
values from the table.
Setting the CO2 content
Space heater 41
–48 kW
Space heater 65 kW (50 kW for CH)
The screw for the CO
2
setting at maximum load is located at position 1.
Using a hexagon socket SW 2.5 mm to turn it clockwise reduces the CO
2
content,
while turning it anti-clockwise increases the CO
2
content.