Servicing/Maintenance
29
6.4
Adjusting the cover pressure
Tools needed
• 1 socket wrench size 3
• 1 socket wrench size 4
• 2 open-end spanner size10
1. Close the lock and turn the grip (C2) counter-clockwise until it stops.
2. Unscrew the Allen screw (C1) from the grip.
3. Pull off the grip (C2) and the carrier (C3) (see following figure).
C4
C5
C2
C1
C4
C3
Fig. 6.4/1:
Pull off grip and carrier
4. Unscrew both Allen screws (C4) from the locking cap (C5) and remove the locking
cap.
5. Now put the carrier (C3) and the grip (C2) back on the axle and tighten again with the
screw (C1) (see following figure).
Fig. 6.4/2:
Attach carrier and grip
GB
H2190XM_DE-EN_180301.indd 29
19.07.18 14:42
