Buhler GAS 222.30 Ex2, Installation And Operation Instructions Manual

Page: 14 / 47

GAS 222.30 Ex2
5 Operation and Control
NOTICE
The device must not be operated beyond its specifications.
NOTICE
The weather hood (if applicable) must be closed during operation!
WARNING Housing or component damage
Never exceed the maximum working pressure and temperature range of the drive.
DANGER Explosion hazard due to electrostatic discharge
Equipment may only be used where normal operating conditions do not produce fre-
quent flammable, electrostatic discharge.
5.1 Before Startup
Before starting the device, verify:
– The hose- and electrical connections are not damaged and correctly installed.
– No parts of the sample gas probe have been removed.
– The protection and monitoring devices are installed and functional (e.g. flame arrester).
– The gas inlet and outlet on the gas probe are open.
– Ambient parameters are met.
– Probe parts are resistant to media to be conveyed and in the surrounding area.
– The performance specifications in the type plate are met.
– The electrical connections are tight.
– The monitoring equipment is connected and set as specified.
– All connection cables are installed without strain.
– Precautions have been taken.
– The earth is proper and functional.
– The outlet filter and the handle with O-ring are installed (if applicable).
12 Bühler Technologies GmbH BE460064 ◦ 08/2019