Dual Mixing
This module combines two different forms of utility mixer
– a two channel DC summing mixer and a three channel,
two bus output mixer.
The DC Mixer section takes two DC-coupled inputs, passes
them through polarizing attenuators before summing
them to the DC-coupled output. This section is useful for
scaling and combining control signals, but can equally be
used for audio signals.
The Output Mixer has three DC-coupled inputs which feed
two separate summing buses via individual Level controls.
Both 1/4” outputs are AC-coupled and are Impedance
Balanced. The lower Main sum features an extra Master
level control before output, while the Sub sum passes out
at full amplitude.
This arrangement allows signals to be output either to
independent destinations or in a stereo arrangement (set
Main Master to full).
Internal jumpers can be set to attenuate the two outputs
independently by approximately 12dB if required.
