System Specifications
External Supply Voltage:
+12V DC, 1.5A (per Frame), 2.1mm, centre-positive, polarity and
over-current protected
Internal System Voltage:
B/-15V, 500mA per rail per frame
Power Bus Connections:
4 Way MTA100, 5” power cables
Waveform Voltages:
10V peak-to-peak (unipolar 0-10V or b/-5V)
Gate Input Threshold:
approx. +1V
Main Path Input Impedance:
30K Ohm Typical
Control Input Impedance:
100K Ohm Typical
Output Impedance:
470 Ohm Typical
Signal Connections:
4mm Banana Socket, Impedance Balanced 1/4” socket
Module Size:
Frac Rack Standard
Modules are measured in multiples of FracWidth (FW) with 1FW being 1.5” width.
Modules are 5.25” tall (3 rack unit) and a maximum of 1.65” deep.
Module Fixing:
M3 x 10mm Bolt.
The Frame Chassis and PCB Panels are all connected to Chassis 0V which joins the System 0V by
the DCDC converter.
Thanks to Palle Dahlstedt for his diverse and detailed observations during beta-testing.
And to the old-blue crew for allowing me to bounce ideas off them for the last few years.
Guarantee
The SynthVoice comes with a 2 year 'reasonable' warranty. If any mechanical or electronic failure
occurs within the period, I will repair the fault free of charge. This excludes failure from
maltreatment or modification and any cosmetic degradation. Contact should first be made via
email to discuss the problem. Shipping to return the device is paid by the user and I cover return
shipping. Failures that are not covered by this guarantee may be fixed at standard rates.
