8
FUNCTION
Battery installation
To install the batteries follow the paragraph “REPLACE BATTERY”. NOTE: After you install or replace new
batteries, please wait about 30 sec then do the starting-up.
Switching on
Place the scale on flat and firm surface - this is essential for correct measurement. Place your hand just
over the scale weighing surface
for more than 2 sec.
. Automatically the 4 function buttons light up
on the display
. Touch the surface of the ON/OFF button to switch
on the scale .
Weighing
After touching the surface of the ON/OFF button, as soon as ‘0’ appears,
the scale is ready for use.The maximum weighing capacity of the scale is 5 KG.
The SYSTEM button allows you to choose between Metric (Kg/g) or Impe-
rial (Lb/oz) as your preferred system of measurement. The display will show
‘Err’ when the scale is overload.
WARNING: Continuous excessive overload
may damage the weighing function.
Tare Function
After weighing the first item on the scale and with the item remaining on the
scale, touch the surface of the TARE/SET button to reset the scale to
zero. You may then add the second item on the scale and it will show the
weight of the second item only. You may repeat the same steps for weighing
consecutive items up tp a max. total weight of 5 kg (11 lb).
Auto-Off Function
You may switch off the scale at any time by touching and hold the surface of
the ON/OFF button for 3 seconds. In order to prolong the battery life,
the scale will be switched off automatically when:
(a) the weight reading is steady for about 60 seconds.
(b) the scale is not in use for 60 seconds.
A
B
