8
“Power source switch”
Turns on the main power of the control.
“Left-Stop-Right” travel direction switch (S1)
Placing the switch in the selected side causes the machine to move in that particular welding direction.
For automatic travel, the travel switch on the NA3 must be in the travel position. To operate manually,
the switch must be in the hand position.
“Speed potentiometer” (R1)
Accurately adjust speed travel speeds (cm/min) of the girth welder. The speed can be monitored at the
control display.
U.S. version of Bug-o All Time BGW would be programmed to display travel speed in IPM (inch per minute).
Normal / full speed travel switch
Activate girth welder full speed travel when the welding equipment is set to “manual” mode or “off”.
