11
Electric flux winch
A 220VAC power winch is mounted on a “L” post at the roof of the girth welder, it
provides a max. lifting capacity of 375 lbs. (170 kg) to lift welding flux up to 98'
(30m) below the girth welder.
Please refer to the Winch MW170 manual for details.
INSTALLATION AND OPERATIONS
Correct installation and setup is critical to ensure proper operation of the BGW
and welding equipment.
Frame Setup
Remove the machine from the crate. A lifting device capable of lifting 4,409 lbs. (2000 kg) is required. Place a
crane hook to the lifting eye and carefully lift the machine upright.
CAUTION: When lifting the double frame (BGWII), please use the four lifting eyes at the middle of the
double sided frame.
drive wheel and
driven wheel
support belt
and wheel
expansion top
wheel
control
box
NA-3
seat
tooling
box
850
