Buffalo TeraStation WS5200DN2, User Manual

Page: 35 / 109

16
Right-click the new drive and select Initialize Disk .
17
Right-click the initialized hard drive and select Convert to Dynamic Disk . A RAID array cannot be built unless the
hard drive is converted to a dynamic disk.
18
Select the step depending on your reason for a created volume.
To create a new volume (except for a RAID 5 or mirrored volume):
(1) Right-click the new dynamic disk and select New Volume .
(2) Follow the instructions on the screen to create a new volume.
To restore a RAID 5 volume (RAID resynchronization):
(1) Right-click the volume labeled "Failed Redundancy" and click Restore Volume .
(2) When "Select one of the disks listed below." is displayed, select the drive to restore and click OK .
Perform steps (1) and (2) for each volume that requires RAID resynchronization.
(3) Right-click the volume labeled "Missing" and select
Remove Disk .
34