TeraStation Pro WSS User Manual
48
Errors and Information
The LCD panel on the TeraStation displays the messages below when errors occur.
LCD Message
Description
ＳＹＳＴＥＭ Ｅｒｒｏｒ Ｅ１１
Ｆａｎ Ｆａｉｌｕｒｅ
An error occurred in the fan speed.
Check that no foreign objects or dust are clogging the fan. If any foreign
objects or dust are found, use a pair of tweezers, air duster, or other tool
to remove them.
If the error is displayed again, contact Buffalo technical support for
assistance.
ＳＹＳＴＥＭ Ｅｒｒｏｒ Ｅ１２
Ｃｏｏｌｉｎｇ Ｆａｉｌｕｒｅ
System temperature has exceeded the maximum safe value. Do not place
objects in the area around the TeraStation. Install the TeraStation in a cool
location.
ＨＤｘ Ｅｒｒｏｒ Ｅ１６
ＨＤｘ Ｎｏｔ Ｆｏｕｎｄ
Unable to find hard drive X. Hard drive X may be disconnected or may
have failed. Reinstall the hard drive.
ＨＤｘ Ｂｒｏｋｅｎ Ｅ３０
Ｒｅｐｌａｃｅ ｔｈｅ Ｄｉｓｋ
The number X hard disk may have failed, or the number x hard disk may
be disconnected. Replace the hard disk.
ＳＹＳＴＥＭ Ｉ１０
ＴＯＯ ＨＯＴ！
The system temperature may have exceeded the safeguard value.
Do not place objects in the area around the TeraStation. Install the
TeraStation in a cool location.
ＯｐｅｒａｔｉｏｎＭｏｄｅＩ１２
Ｄｅｇｒａｄｅｄ Ｍｏｄｅ
Operating in degraded mode.
ＲＡＩＤ Ｉ１８
ｘＤｒｉｖｅ Ｒｅｂｕｉｌｄｉｎｇ
Rebuilding drive X in the array.
Note:
Transfer speeds are slower during the rebuild process.
Ｒｅｐｌｉｃａｔｉｏｎ Ｉ３３
ＲｅｐｌｉｃａｔｉｏｎＦａｉｌｕｒｅ
An error occurred during replication. Click
Sync
in Backup & Replication
Settings to attempt replication again.
Ｎｅｗ Ｆｉｒｍｗａｒｅ Ｉ５２
Ａｖａｉｌａｂｌｅ
A new firmware version has been released. Update the firmware.
ＢａｃｋｕｐＴａｓｋｘ Ｉ５４
Ｂａｃｋｕｐ Ｆａｉｌｕｒｅ
A backup job has failed. Make sure that the backup job is cofigured
correctly, and that the NAS is on and not in standby mode. If the backup
job still fails, check the status of NAS, network, and backup source
destination. Also, check the backup log to see if any errors were recorded.
