Chapter 7 | Repair
Disassembly
www.buffalofilter.com +1 716.835.7000 (International) 800.343.2324 (United States) [email protected]
Fascia
1. Remove the filter.
2. Locate and remove the six (6) screws which secure the
fascia assembly to the body assembly using a phillips
screwdriver (
Figure 7-1
).
3. Carefully remove the fascia from the body assembly. Taking
care not to damage the connected wire harnesses.
4. Disconnect the PCB HARNESS 35 from the printed circuit
board connector J3 (
Figure 7-2
).
5. Disconnect the ribbon cable tail of the KEYPAD VV from the
printed circuit board connector J4 (
Figure 7-3
).
6. Remove the fascia assembly (
Figure 7-4
).
7-4
Figure 7-1
Figure 7-2
PCB HARNESS 35 / J3
SCREW 6-32 5/16
PH FH SS
QTY - (6)
Figure 7-3
KEYPAD VV / J4
Figure 7-4
Phillips
Screwdriver
SCREW 6-32 5/16 PH FH SS
QTY - (6)
(2) on top, (2) on bottom, (1) on each side
FASCIA VV
Ribbon
Cable
KEYPAD VV
