Buell 2005 P3, Service Manual, Page: 55 / 426

1-6 2005 Buell P3: Maintenance
HOME
MAINTENANCE SCHEDULE 1.3
NOTES:
1. Should be performed by an authorized Harley-Davidson dealer, unless you have the proper tools, service data and are
mechanically qualified.
2. Inspect wheel bearings whenever wheel is removed (tire change, fork fluid change, etc.)
3. Change brake fluid every two (2) years.
Table 1-1. Regular Service Intervals For Buell Blast Models
ITEM SERVICED PROCEDURE
1
0
0
0
mi
1
6
0
0
km
2
5
0
0
mi
4
0
0
0
km
5
0
0
0
mi
8
0
0
0
km
7
5
0
0
mi
1
2
0
0
0
km
1
0
0
0
0
mi
1
6
0
0
0
km
1
2
5
0
0
mi
2
0
0
0
0
km
1
5
0
0
0
mi
2
4
0
0
0
km
1
7
5
0
0
mi
2
8
0
0
0
km
2
0
0
0
0
mi
3
2
0
0
0
km
2
2
5
0
0
mi
3
6
0
0
0
km
2
5
0
0
0
mi
4
0
0
0
0
km
NOTES
Engine oil and filter Replace X X X X X X
Inspect X X X X X
Oil lines and brake system Inspect for leaks X X X X X X X X X X X 1
Air cleaner Inspect, service as required X X
Crankcase breather hose Drain X X X X X X
Tires Check pressure, inspect tread X X X X X X X X X X X
Transmission lubricant Replace X X X X X X 1
Clutch Check adjustment X X X X X X 1
Primary chain Check adjustment X X X X X X X X X X X 1
Rear belt and rear sprocket Replace X 1
Throttle control Check operation X X X X X X X X X X X 1
Throttle, brake and clutch
controls, jiffy stand Lubricate X X X X X 1
Fuel valve, lines and fittings Inspect for leaks X X X X X X X X X X X 1
Fuel tank filter screen Clean X 1
Brake fluid Check levels and condition X X X X X X 3
Brake pads and discs Inspect for wear X X X X X X X X X X X
Rear brake pads and rear
brake pins Replace X 1
Rear brake pedal Check operation X X X X X X 1
Spark plug Replace X X
Electrical equipment and
switches, starter interlock Check operation X X X X X X X X X X X
Engine idle speed Check adjustment X X X X X X X X X X X 1
Ignition timing Check X X 1
Front fork oil Replace X 1
Steering head bearings Lubricate and adjust X 1
Rear shock absorber Check X X
Wheel bearings Inspect 2
Exhaust system hardware
including muffler strap Inspect X X 1
Critical fasteners Check tightness X X 1
Engine mounts and
stabilizer links Inspect X X 1
Battery Check battery and clean
connections X X X X X X X X X X X
Road test Verify component and
system functions X X X X X X X X X X X