Positioning the boiler
6
Logano GB125 oil condensing boiler - Technical specifications are subject to change without prior notice.
24
6.3
Fitting adjustable feet or a boiler plinth
You can level the boiler with the adjustable feet or the
plinth to prevent air pockets forming inside the boiler.
Prerequisite: The burner cover has been removed
(
To simplify installation work use a boiler trolley underne-
ath the boiler (
6.3.1 Fitting the adjustable feet
B
Tilt the boiler using a suitable transport accessory
(
Chapter 5.3, page 21) or place a timber support
underneath.
B
Turn the adjustable feet 5 - 10 mm into the boiler.
B
Gently set the boiler down.
6.3.2 Fitting the boiler plinth (accessory)
B
Turn the adjustable feet 5 - 10 mm into the second
elements of the boiler support.
Fig. 14
Fitting the adjustable feet
1
Angled rail
2
Adjustable feet
1
2
USER INFORMATION
The adjustable feet are not required when
installing the boiler on a horizontal DHW
cylinder.
Fig. 15
Fitting adjustable feet to plinth (height 140 mm)
