4
Placing the boiler
Logano GB125 BE US/CA - Subject to technical modifications.
16
4.3
Mounting the adjustable feet (included with B-kit)
Level the boiler by turning the adjustable feet to prevent
air pockets becoming trapped inside the boiler.
Requirement: the burner hood or burner door panel must
have been removed first (
Æ
Chapter 3.1, page 12).
B
Tilt the boiler with the aid of a hand truck or trolley (
Æ
Chapter 3.3, page 13) or place a wooden batten
underneath to jack it up.
B
Screw in adjustable feet [2] ¼ " – 1/8".
B
Gently set the boiler down.
Fig. 11 Fitting the adjustable feet
(burner not shown)
1
Angle bracket
2
Adjustable feet
4.4
Positioning and leveling the boiler
B
Position the boiler in its final location.
B
Level the boiler by rotating the adjustable feet as
required and using a level.
Fig. 12 Leveling the boiler
If the boiler is mounted on top of a horizontal
hot water tank the adjustable feet are not
used.
7 747 019 141-10.1RS
1
2
Protect boiler connections from damage and
dirt if the boiler is not to be installed
immediately.
7 747 019 141-11.1RS
