5
Boiler block assembly
Logano G225/Logano plus GB225 - We reserve the right to make any changes due to technical modifications.
29
V
Insert the hot gas baffles into the centre 3rd hot gas
flues as indicated in the table below. The cast lugs
should point outwards.
Fig. 31 Inserting hot gas baffles into 3rd hot gas flue
The flue gas temperature can be increased by removing
the hot gas baffles (
Æ
Chapter 7.5, page 47).
5.4.3
Installing the burner door
You can fit the burner door with the hinges on the right or
left. In the following points, assembly on the right hand
side is described.
V
Secure the two hinge pins to the front boiler section
with one M 12 × 35 hexagon bolt [1] in each case.
Fig. 32 Fitting the hinge pins (on the right in this exam-
ple)
1
M 12 × 35 hexagon bolt
V
Fit the twin-slooted hinge lobe brackets to the burner
door with an M 12 x 25 bolt in each case.
V
Hook the burner door with the hinge lobes onto the
hinge pins.
V
Close the boiler door.
Fig. 33 Hanging the burner door (on the right in this
case)
1
M 12 × 25 hexagon bolt
Boiler size incl. oil burner
45
55
68
2nd hot gas flue
Top
-
-
-
central
-
2
-
bottom
-
2
-
3rd hot gas flue
2
-
-
Tab. 12 Hot gas baffle plate arrangement
6 720 615 876-31.1RS
6 720 615 876-32.1RS
1
1
Caution: Risk of system damage due to
leaking burner door.
V
Tighten the hexagon bolts on the burner
door evenly.
6 720 615 876-33.1RS
