BC10 basic controller
10
Installation instructions Logamax plus GB142-24/30/45/60 • version 10/2007
39
We reserve the right to make any changes due to technical modifications!
Buderus • http://www.buderus.net
10 BC10 basic controller
10.1 Operating the BC10 basic controller
10.1.1 Switching the heating system on and off
Switching on the heating system
z
Set the main switch on the BC10 basic controller to
position "1" (On).
Switching off the heating system
z
Set the main switch on the BC10 basic controller to
position "0" (Off).
10.1.2 Displaying the operating conditions of the
burner and resetting the burner or resetting
burner faults
Displaying the operating conditions of the burner
The LED indicates the operating condition of the burner.
Fig. 42
BC10 basic controller – Controls
pos. 1:
Main switch
pos. 2:
DHW temperature knob
pos. 3:
LED "DHW status"
pos. 4:
Display
pos. 5:
Space heating water temperature knob
pos. 6:
LED "Heating system status"
pos. 7:
Under the cover a RC system controller can be installed
(not available).
pos. 8:
LED "Burner Operation"
pos. 9:
Service Tool connector
pos. 10: "Service"
e
button
pos. 11: "Chimney sweep"
d
button
pos. 12: "Reset"
c
button
190
170
150
130
90
110
140
130
120
90
100
110
4
7
2
1
5
8
12
10
11
3
6
9
LED Condition
Explanation
On
Burner
operational
The water in the boiler is being heated.
Off
Burner off
The water in the boiler has reached the
required temperature or there is no heat
request.
Table 7
LED indication
