Buderus Logamatic 4321 Operating Instructions Manual Download Page 20

Page: 20 / 80

Basic functions

Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.

6.3.1 Selecting automatic mode

In automatic mode your heating system will operate with the timer program,
i.e. central and DHW heating at preset times.

Example: Enabling automatic mode

Press "AUT".

The LED of the AUT button is on; automatic mode is active.

In addition, either the "Day mode" or "Night mode" LED will light up. This is
subject to the set times for day and night mode.

Automatic day and night mode

At fixed times, central heating is provided or the room temperature is set back.

AUT

room temp set

automatic day

70°F

Fig. 9

Changeover from day and night mode at fixed times (example)

Day mode

Night mode

10:00 pm

(22:00)

5:30 am

(05:30)

63 °F

(17 °C)

6 720 618 326-05.1RS

70 °F

(21 °C)

Summary of Contents for Logamatic 4321

















































































Search results

Summary of Contents for Logamatic 4321

Reviews:

Related manuals for Logamatic 4321

Brands by name

Popular brands

Buderus Logamatic 4321, Operating Instructions Manual

Search results

Summary of Contents for Logamatic 4321

Reviews:

Related manuals for Logamatic 4321

Brands by name

Popular brands