Additional programming options
8
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
56
z
Select a heating zone (
Æ
Chapter 7.6).
Example: Heating zone 2
z
Select the standard program for the chosen heating zone (
Æ
Chapter 7.10).
Example: "daytime program"
The first set point (start point): "06:00am" (06:00) at "70°F" (21°C) will be
displayed. The displayed temperature depends on the set room temperature.
Turn the dial to the start point of the heating phase you want to delete (here:
"11:30am" (11:30)).
Hold down "Time" and turn the dial to the stop point of the heating phase you
want to delete (here: "01:00pm" (13:00)).
If you have selected the stop set point of the heating phase you want to delete,
the bottom line will show eight blocks that are deleted in one-second intervals
from left to right. The heating phase has been deleted when no blocks are left.
The deleting process will be terminated if you release the "Time" button
prematurely or turn the dial back. In this case all set points for the heating phase
remain active.
Release "Time" to save your input.
The display shows the next set point.
The new program that has been modified by the deletion is saved under "custom
program" and the relevant heating zone number (here: "2").
You can call up your new program by pressing "PROG" and turning the dial
(
Æ
Chapter 7.10).
Press "Back" to return to the permanent display.
daytime program
70°F
at 06:00am
Monday
daytime program
Monday
70°F
at 11:30am
+
data point
deleting
custom program 2
21 °
at 5:00 pm
Monday
custom program 2
Monday
70°F
at 05:00pm
Summary of Contents for Logamatic 4321
Page 80: ......
