Basic functions
6
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
19
6.3
Select operating mode
You can operate the MEC2 remote control in two ways:
–
in automatic mode
–
in manual mode
Automatic mode
Typically, buildings are heated less at night than during the day. With the MEC2
remote control, you don't need to adjust the radiator valves before bedtime or in
the morning. The automatic changeover of the MEC2 remote control does this
for you. It switches between day mode (standard mode) and night mode
(setback mode).
The times when your heating system changes from day to night mode – and
vice-versa – are factory-set via standard programs (
Æ
Chapter 7.10). However,
you or your heating contractor can modify these settings (
Æ
Chapter 7.12).
Manual operation
For example, if you want to heat longer in the evening or not quite as early in the
morning, you can also select day and night mode manually (
Æ
Chapter 6.3.2).
You can also use manual mode to heat on cooler days when the system
operates in summer mode.
AUT
Summary of Contents for Logamatic 4321
Page 80: ......
