Buderus Logamatic 4211 Operating Instructions Manual Download Page 39

Page: 39 / 80

Extended functions

Logamatic 4211 - Subject to technical modifications.

Release "Time" key. The newly adjusted time for the "ON" switching point is now
saved.

The modified switching point will be saved under the "Own" program and the
number of the heating circuit (here: "2").

Continue to turn the rotary selector until the next switching point that you want
to change is displayed.

The "OFF" switching point for Monday appears. Now you can modify the time for
the "OFF" switching point.

Hold down "Time", and select the required time with the rotary selector.
Example: "23:00".

Release "Time" key. The newly adjusted time for the "OFF" switching point is
saved.

Next switching point

Continue to turn the rotary selector until the next switching point is displayed.

The next switching point (Tuesday, 05:30) appears.

Also change the following switching points to 06:30 and 23:00. The system will
now heat from 06:30 to 23:00 Monday to Thursday.

Press "Back" to return to the permanent display.

The modified standard program is saved under "Own" and the number of the
heating circuit.

Own program 2

Monday

21°C

at 06:30

USER INFORMATION

You can change the weekday if you press "Weekday" instead of "Time".

You can change the switching state ("ON"/"OFF") by pressing "Display"
instead of "Weekday" or "Time". The operating mode determines the switching
state: "ON" = day mode, "OFF" = night mode.

Ensure that an stop point is associated with every start point.

Summary of Contents for Logamatic 4211

















































































Search results

Summary of Contents for Logamatic 4211

Reviews:

Related manuals for Logamatic 4211

Brands by name

Popular brands

Buderus Logamatic 4211, Operating Instructions Manual

Search results

Summary of Contents for Logamatic 4211

Reviews:

Related manuals for Logamatic 4211

Brands by name

Popular brands