Buderus Logamatic 4211 Operating Instructions Manual Download Page 19

Page: 19 / 80

Standard functions

Logamatic 4211 - Subject to technical modifications.

6.3.1 Selecting automatic mode

In automatic mode your heating system will operate with the time switch
program, i.e. central and DHW heating at preset times.

Example: Enabling automatic mode

Press "AUT".

The "AUT" LED illuminates; automatic mode is enabled.

In addition, either the "Day mode" or "Night mode" LED will illuminate. This is
subject to the set times for day and night mode.

Automatic day and night mode

At fixed times, central heating is provided or the room temperature is set back.

6.3.2 Selecting manual mode

Press either "Day mode" or "Night mode" to change to manual mode.

Press "Day mode".

The "Day mode" LED illuminates. Now your heating system is in constant day
mode (standard mode).

Press "Night mode".

The "Night mode" LED illuminates. Your heating system is now in constant night
mode (setback mode), and operates at a lower room temperature.

AUT

Set room

Automatic day

21°C

Fig. 9

Changeover from day and night mode at fixed times (example)

Day mode

Night mode

7 747 012 053-18.1RS

05:30

22:00

21 °C

17 °C

Set room

Constant day

21°C

Set room

Constant night

17°C

USER INFORMATION

If you have selected manual mode, other automatic controls will also be
switched off, e.g. the summer/winter time adjustment (

Chapter 7.13).

Summary of Contents for Logamatic 4211

















































































Search results

Summary of Contents for Logamatic 4211

Reviews:

Related manuals for Logamatic 4211

Brands by name

Popular brands

Buderus Logamatic 4211, Operating Instructions Manual

Search results

Summary of Contents for Logamatic 4211

Reviews:

Related manuals for Logamatic 4211

Brands by name

Popular brands