Standard functions
6
Logamatic 4211 - Subject to technical modifications.
17
6
Standard functions
In this chapter you will find information about the standard functions of the MEC2
programming unit and their use. The standard functions are:
–
Selecting the operating mode
–
Setting the room temperature
–
Setting the DHW temperature
–
Heating DHW once
6.1
Simple operation
The standard functions are controlled by pressing one of the keys on the
"Standard function" keypad or by turning the rotary selector.
Example: Adjusting the room temperature for day mode
Press "Day mode" to select the standard heating mode (day mode). The LED of
the "Day mode" key illuminates; day mode is enabled.
Set the required room temperature by turning the rotary selector. (Condition: For
this, the programming unit flap must be closed.)
The display shows the set value.
Tag
Zeit
Temp
Urlaub
Auswahl
So/Wi
Anzeige
Heizkreis
Zurück
AUT
AUT
Set room
Constant day
21°C
USER INFORMATION
If your heating system is equipped with several heating circuits, first select the
correct heating circuit (
Æ
Chapter 7.6). Only then can you select the operating
mode and room temperature.
USER INFORMATION
The following MEC2 displays only describe the possible displays:
–
of the ZM422 module (standard equipment level)
–
of the most frequently used FM442 module (accessory)
