btsr IS3W/TTS, Operating Manual

Page: 46 / 81

Operation
- 3.34 - SMART 200 TTS
NEW - Creating a New Article
SETUP NEW
This function allows creating a new article and associating to such article the
quality control parameters that will be used by IS3W/TTS sensors during the
processing phase of the article itself. For each parameter you will have to program
the values summarised in the following table (the values into brackets are the
default ones).
Article …………………. SPEED 1-1000 [default 20] … m/min
Parameter Value
TPS (M)(I) Max 1-999 [default 200]
TPS (M)(I) Min 1-999 [default 100]
SENS 1-8 [default 4]
FILTER 1-8 [default 4]
TIMEer 100-5000 ms [default 700]
The SPEED parameter indicates the article collection speed performed by the
machine (in m/min).
The TPS (M)(I) Max - TPS (M)(I) Min parameters represent the maximum and
minimum interval of twisting outside which an error shall be signalled.
The SENS (sensitivity), FILTER (digital filter to reduce the influence of hairiness)
and TIMEer (sensor reaction time) parameters, are other data associated to each
article that allow optimising the efficiency of IS3W/TTS.
Once you have selected the SETUP NEW function you are prompted to enter
the name of the new article. Type the name using to set the
characters and use to move the cursor.
If you enter a name already existing, the warning message DOUBLE NAME will
be displayed. In this case press and enter a new name.
B